20 ft module
TRAIN 20
Compact private fitness module.
TRAIN 20 is a purpose-built private training space on a 20 ft high-cube steel module. Built off-site. Delivered finished. Connected on your property.
Standard equipment is a power rack, a cable system, a back system and a leg machine. That is a complete strength setup — press, pull, squat, hinge, carry — in a compact footprint.
Twenty feet has limits and we would rather say them out loud than let you find them after delivery.
Complete strength
Power rack, cable system, back system, leg machine. Every basic movement pattern is covered.
Steel platform
High-cube modular steel structure. Insulated, sealed and finished for year-round Northeast use.
It moves
Set on a prepared pad, not a permanent foundation. If you move, it can go with you.
Dimensions
20 ft high-cube module
- Exterior L × W × H
- 20 ft × 8 ft × 9 ft 6 in
- Exterior footprint
- 160 sq ft
- Interior before finish
- 19 ft 4 in × 7 ft 8 in × 8 ft 10 in
- Interior finished (approx.)
- 19 ft × 7 ft × 8 ft 2 in
- Finished interior area (approx.)
- 133 sq ft
Finished interior dimensions are approximate and vary with the wall assembly.
Concept imagery. Renderings of Homebase builds, not photographs of delivered projects.
Standard equipment
- Power rack
- Cable system
- Back system
- Leg machine
The tradeoff
- One person trains at a time. Two is tight.
- No turf lane and no open functional floor.
- No cardio in the standard layout — it comes out of the strength footprint.
- No dedicated stretch or mobility zone. You use the floor in front of the rack.
- Storage is wall-mounted, not a storage zone.
Standard
- Power rackEquipment
- Cable systemEquipment
- Back systemEquipment
- Leg machineEquipment
- Performance flooringFinish
- Climate controlFinish
Configurable
- Cardio pieceEquipment
- Glass and mirror packageFinish
- Cedar interior detailingFinish
Best for
- Single-user training
- Smaller lots
- First Homebase
Site considerations
- Prepared placement pad
- Delivery access
- Power service
Investment direction is shared at your design consultation.
Moveability
Build it here. Take it with you.
A Homebase sits on a prepared pad, not a foundation you are married to.
An addition stays with the house. A Homebase does not have to.
It is a manufactured structure, set down rather than built in place. Power is connected, water and drainage where recovery is included, and the module is levelled on the pad. All of that can be undone.
Relocation is real, not automatic. It depends on access for a crane and transport, the pad at the new property, the utility runs at both ends, and what has been built around the module since it was set. We assess each site rather than promise every one.
Concept imagery. Renderings of Homebase builds, not photographs of delivered projects.
